Tag: Chinese warplanes

  • Military Knowledge: Chengdu J-10 Multirole Fighter Jet

    Military Knowledge: Chengdu J-10 Multirole Fighter Jet

    The development of the J-10 fighter program started in the mid-1980s, initially referred to as Project 8610. It was originally designed as a high-performance air superiority fighter to face emerging fourth-generation aircraft, including the F-16 and MiG-29. However, with the Cold War’s conclusion and evolving requirements, the focus shifted towards creating a multi-role fighter suitable for both air-to-air and ground attack missions. Ultimately, the J-10 serves as a successor to the older Chinese J-7 and Q-5 fighters.

    The development of the J-10 benefited from the canceled Israeli Lavi lightweight fighter project, which itself is similar to and derived from the American F-16.

    The J-10 was originally intended to be powered by a Western jet engine, but the arms embargo imposed on China by the United States and the European Union in 1989 forced China to seek assistance from Russia. As a result, the J-10’s airframe underwent modifications to accommodate the larger Russian Saturn AL-31F engine.

    J-10A fighter jet with Russian AL-31 engine

    The design of the J-10 features a tailless delta wing, incorporating a vertical rudder and two fixed inverted ventral fins located on the underside of the fuselage near the tail (engine). Additionally, it has two canards positioned at the nose.

    The J-10 fighter made its inaugural flight on March 22, 1998, and began operational service with the People’s Liberation Army in 2003. Between 2004 and 2006, an initial batch of 100 units in both single-seat and two-seat variants was delivered to the PLA Air Force (PLAAF).

    The Chengdu J-10 has been developed into four variants, designated with the suffixes A, S, B, and C, each featuring slight differences in appearance.

    Appearance differences in different models of the J-10 fighter jet

    J-10A: The J-10A is the first variant introduced in the J-10 family. It is reported that approximately 300 units of this model are currently in service, although production has now ceased. The J-10A is equipped with a domestic Type 1473 pulse-Doppler radar, which can track up to 10 targets simultaneously and engage 2 targets with semi-active radar-guided PL-11 air-to-air missiles, or 4 targets using active radar-guided PL-12 (SD-10) air-to-air missiles. The Type 1473 radar is recognized as China’s first successful and operational pulse-Doppler radar system. The J-10A fighter is powered by a Russian Saturn AL-31FN turbofan engine, providing 79.43 kN of thrust in dry mode and 122.58 kN with afterburner. The naval variant of this model is known as the J-10AH.

    J-10S: A two-seat, trainer version of the J-10, which matches the performance and avionics of the J-10A. It features an extended front fuselage to fit an additional pilot seat. This aircraft serves both pilot training and standard fighter roles. The two-seat naval version is commonly referred to as the J-10SH.

    J-10S two-seat fighter jet participating in a military exercise in Russia
    J-10S fighter jet undergoing aerial refueling

    J-10B: An enhanced iteration of the J-10A, publicly unveiled in 2016. This model features a larger radome designed to accommodate the active electronically scanned array (AESA) radar system and infrared search/tracking suite (IRST) in the nose. It incorporates an electronic-optical targeting system (EOTS) and a redesigned air intake compared to the earlier version. Additionally, the aircraft boasts an upgraded avionics suite, which includes an indigenous passive electronic array (PESA) fire control radar capable of engaging four targets at once. Beyond standard armaments, the J-10B can deploy the new PL-10 infrared-guided and PL-15 active radar-guided missiles. Although the J-10B typically uses the AL31 engine, some variants are reportedly equipped with the WS-10.

    J-10C: This is the newest model in the J-10 series, which first flew in December 2013 and was introduced into service with the People’s Liberation Army Air Force (PLAAF) in 2018. Visually, it closely resembles the B model. Essentially, as an upgraded variant of the J-10B, this fighter incorporates all its predecessors’ capabilities in a more efficient and optimized manner. The J-10C features the Chinese Shenyang WS-10B engine and the domestically developed active electronically scanned array (AESA) fire control radar designated KLJ-10. This advanced radar can identify small targets with a radar cross-section (RCS) of 5 square meters from over 200 km away. Additionally, the J-10C is armed with short-range PL-10 air-to-air missiles featuring infrared guidance and long-range PL-15 air-to-air missiles with active radar guidance. The J-10C is characterized as a Chinese 4.5th generation fighter.

    Chinese Air Force J-10C fighter jet

    The article further discusses additional details and features of the J-10 fighter, which include:

    The J-10 cockpit incorporates “hands on throttle and stick” (HOTAS) controls, enabling operation of weapon systems without leaving the aircraft’s essential controls. It includes one color and two monochrome liquid crystal multifunction displays (MFDs), along with a holographic heads-up display (HUD) that provides a wide field of view. Additionally, the aircraft is equipped with the domestically developed Helmet Mounted Site (HMS).

    The J-10 B and C fighters feature an electronic-optical targeting system (EOTS) positioned on the right side in front of the cockpit. This system comprises an infrared search and track (IRST) sensor along with a laser rangefinder (LR), enabling passive target identification without activating the fire control radar, thus minimizing the chances of the aircraft being detected.


    The J-10B and J-10C models feature a diverterless supersonic inlet (DSI). This design removes all moving components from the air inlet, thereby decreasing the overall weight and minimizing the aircraft’s radar signature.

    The difference in air intake between the J-10A (right image) and the J-10B/C (left image) is visible.

    The J-10B and J-10C feature a curved upper edge on the tail, contrasting with the flat tail of the J-10A. Additionally, a significant lip has been introduced at the tail’s tip to house electronic warfare and electronic countermeasures (EW/ECM) systems. The fuselage is equipped with four black ECM antenna arrays: a larger one positioned on each side of the cockpit and a smaller one on each side of the rear fuselage close to the engine nozzle.

    The EW/ECM equipment in the tail section of the J-10B fighter

    The fighter jet is equipped with a Type 23-3 twin-barreled 23mm cannon, which is a reverse-engineered Russian GSh-23L cannon, and is mounted on the left side of the front landing gear.

    J-10B fighter jet firing with a 23mm cannon

    The fighter is equipped with 11 external weapons bays: six located under the wings, two beneath the air intakes, and three under the fuselage. Its primary air-to-air armaments consist of the PL-15 long-range missile, the PL-11 semi-active radar-guided medium-range missile, the PL-12 (SD-10) active radar-guided medium-range missile, and the PL-8 short-range infrared missile.

    The J-10C can carry the Russian Vympel R-73 (AA-11 Archer) or R-77 (AA-12 Adder) missiles, as well as the KH-31P anti-radar missile.

    For ground attack missions, the aircraft can carry conventional low-drag bombs weighing up to 250 kg or laser-guided bombs. A laser targeting pod can also be carried under the fuselage for target designation. More complete information on the weapons is provided at the end of the article in the fighter specifications section.

    Pakistani J-10C fighter equipped with PL-15E and PL-10E missiles and additional fuel tank

    The J-10C has an empty weight of approximately 9,750 kg and weighs 14,000 kg in a normal air-to-air combat configuration. In its maximum takeoff configuration, it weighs 19,277 kg. The aircraft has an internal fuel capacity of 4,950 kg and can carry a maximum external weapons load of 5,600 kg. It is capable of reaching a maximum speed of Mach 1.8 at high altitude and Mach 1.2 at sea level.

    Regarding its engine, the J-10C is powered by the domestically produced Shenyang WS-10B engine, which provides a thrust of 144 kN (32,000 lbf). This engine has a service life of 1,500 hours. A newer variant, the WS-10B-3, features a thrust vectoring nozzle (TVC) and was showcased at the 2018 Zhuhai Air Show in China.

    Overall, the WS-10 engine, developed from the Russian AL-31 engine, has multiple versions used to power various Chinese fighter jets, including the J-10, J-11, J-15, J-16, and the J-20.

    A Chinese J-10B fighter jet equipped with a WS-10B-3 engine performs the “Pugachev Cobra” maneuver at the 2018 Zhuhai Air Show [Photo by ZHOU GUOQIANG/FOR CHINA DAILY]

    Pakistan is the only country other than China to operate J-10 warplanes. The Pakistan Air Force operates 20 J-10CEs, with another 16 in the process of production and delivery.

    J-10CE fighter jet for export at the 2024 Zhuhai Air Show

    In May 2025, during the Indo-Pakistan air-to-air combat, the Pakistan Air Force’s J-10Cs successfully shot down at least four aircraft from the Indian Air Force, which were of French and Russian origin, using PL-15E missiles. This operation marked a significant milestone for the J-10C fighter jets.

    The PL-15 missile poses a considerable threat to American forces, as it can easily place fighter jets equipped with AIM-120 in a vulnerable position in the Pacific region. The Chinese version of the PL-15 has a range of 200–300 km, while its export variant, the PL-15E, utilized by the Pakistan Air Force, has an effective range of about 145 km. This missile is powered by a dual-pulse solid-fuel rocket motor, enabling it to reach speeds exceeding Mach 5. It is also equipped with an active electronically scanned array (AESA) radar seeker and a mid-flight datalink for enhanced targeting capabilities.

    The J-10C can be viewed as an alternative to the American F-16 and the Swedish Gripen. As a technologically updated and relatively affordable option, the J-10C is ideal for customers looking to enhance their fleet with advanced air defense systems, especially if they prefer to avoid political complications associated with Western fighter jets.

    This lightweight fighter boasts high maneuverability, a powerful engine, and an advanced radar system with a range exceeding 200 km. It is also compatible with long-range missiles and features an updated cockpit. In terms of ammunition capacity, the J-10C is comparable to the Gripen but has a smaller overall capacity than the F-16. To mitigate this limitation, China has equipped the J-10C with a dual missile pylon that can hold either two additional short-range missiles or two beyond-visual-range (BVR) missiles, thereby enhancing the fighter’s payload and operational range.

    J-10C with dual weapons pylon at the 2024 Zhuhai Air Show equipped with two PL-15 missiles

    J-10C specifications:

    Type: Multirole fighter jet
    Country of manufacture: China
    Manufacturer: Chengdu Aircraft Corporation (CAC)
    Crew: 1 (2 on J-10S)
    Length: 16.9 m
    Wingspan: 9.8 m
    Height: 5.7 m
    Wing area: 37 m2
    Empty weight: 9,750 kg
    Gross weight: 14,000 kg
    Maximum takeoff weight: 19,277 kg
    Fuel capacity: 4950 L (3860 kg) internal. 4000 L (3120 kg) external with 3 drop tanks (2 × 1600L + 1 × 800L)
    Engine: 1× Shenyang WS-10 turbofan with afterburner (AL-31 on J10-A/B)
    Top speed: 2,222 km/h (Mach 1.8)
    Range: 1,850 km (without external fuel tanks)
    Combat range: 550 km
    Ferry range: 4,600 km
    Ceiling: 18,000 m (59,000 ft)
    Armament:
    – 11 hardpoints with a capacity of 5,600 kg of external fuel and ammunition
    – One 23 mm Gryazev-Shipunov GSh-23 cannon
    – 90 mm rocket pod
    – PL-8, PL-10 (J-10C), PL-11, PL-12, PL-15 (J-10C) air-to-air missiles
    – KD-88 and YJ-91 air-to-surface missiles
    – LT-2 and LS-500J laser-guided bombs
    – LS-6, GB3, GB2A, GB3A air-to-air bombs
    – FT-1 satellite-guided bombs
    – 250 and 500 kg free-fall bombs
    External pods:
    K/JDC01A targeting pod (on J-10A)
    Hongguang-I infrared search and tracking pod (on J-10A)
    CM-802AKG targeting pod for KD-88 and YJ-91 (on J-10C)
    KG600 electronic warfare pod
    Blue Sky navigation and attack pod

    Chengdu J-10C multirole fighter jet

    More images of the Chengdu J-10C fighter jet:

    Sources:
    Chengdu J-10

    Chengdu J-10
    Chengdu-J-10
    J-10
    PLA’s J-10C fighter
    Chengdu J-10 Firebird
    Chengdu J-10

    KLJ-10
    Pakistan’s J-10CE fighter brings new radar and long-range missiles
    J-10 dual missile pylon
    WS-10

  • China Unveils Two Sixth-Gen Fighter Jets: Chengdu J-36 and Shenyang J-50

    China Unveils Two Sixth-Gen Fighter Jets: Chengdu J-36 and Shenyang J-50

    The Chengdu Aircraft Corporation’s (CAC) J-36 fighter jet has garnered significant attention due to its unique design. It was first publicly observed during a test flight over Chengdu, accompanied by a J-20S fighter jet.

    The J-36 fighter features a diamond-like double delta wing configuration, lacking both a tail and a vertical rudder. The removal of the vertical rudder is intended to reduce the radar cross-section. The wing angles suggest that it has been aerodynamically optimized for supercruise capability.

    The J-36 fighter jet employs five trailing edge control surfaces on each wing, including two split flap rudders at outboard wing edges to enhance maneuverability.

    Two split flap rudders at outboard wing edges to enhance maneuverability.

    A notable aspect of the J-36’s design is its use of three low-radar section turbofan engines, with the two outboard engines likely featuring thrust vector control (TVC). The engine with a movable nozzle enhances the fighter’s maneuverability. The use of three engines is a unique and innovative choice for this type of fighter jet. Previous designs and previews depicted the J-36 with two engines, making the current configuration even more distinctive.

    The J-36 features three air intakes: one located on top of the fuselage behind the cockpit, and two on the underside of the fuselage.

    Based on available information, the J-36 fighter is estimated to be between 20 and 26 meters in length, with a wingspan of approximately 24 meters and a wing area of over 200 square meters. Its maximum takeoff weight is estimated to be between 45 and 55 tons.

    Military experts estimate that J-36 can achieve speeds of Mach 2.5 and has a combat radius of approximately 3,000 kilometers, which is considered exceptionally long for a fighter jet.

    The J-36 has three weapons bays. The large, central bay is approximately 7.6 meters long, and can accommodate missiles such as the PL-17 air-to-air missile or heavier air-to-surface missiles. There are two smaller bays under the J-36’s fuselage that can carry smaller missiles. Given the large ammunition bays, the J-36 is likely to also serve as a tactical bomber.

    J-36 flight test over Chengdu city escorted by a J-20S fighter jet

    Another sixth-generation fighter from China is the J-50, developed by the Shenyang Aircraft Corporation (SAC). It was observed during a flight test over Shenyang on December 26, 2024.

    The J-50 fighter jet also incorporates the specific airframe design characteristics of a sixth-generation fighter jet. This prototype features a combination of a delta configuration with a cranked-arrow design with sharply swept lambda wings with droopped wing tips.

    A view of various delta configurations. The J-50 is a combination of the cranked arrow and lambda configurations. The J-36 configuration is similar to the diamond configuration.

    One fascinating aspect of the J-50’s airframe and aerodynamic design is its folding control surfaces. These surfaces can be folded and aligned horizontally along the wing, and when needed, they can be unfolded to act as two vertical fins. This feature enhances the fighter’s maneuverability and control in the absence of vertical rudders. The incorporation of this technology indicates that the J-50 is designed for both air superiority and strike roles.

    A video rendering of the fuselage and aerodynamics of the J-50 fighter jet. The video shows how the folding wings work on this fighter jet.

    Based on available information, the J-50 is approximately 22 meters in length, with a wingspan of 22 meters and a wing area of about 145 square meters. Its maximum takeoff weight is estimated to be around 40 tons. The J-50 can reach speeds of Mach 2 and has a combat radius of approximately 2,200 kilometers.

    The J-50 fighter jet uses two engines and has two air intakes under the fuselage.

    The J-50 is smaller in size compared to the J-36, resulting in smaller ammunition bays and the ability to carry fewer missiles. Its moderate size makes it more suitable for carrier-based operations.

    J-50 fighter jet test flight over Shenyang

    It is important to note that the names of these two sixth-generation fighters have not been officially announced by their manufacturers. The names used, J-36 and J-50, are speculative and have been attributed by military experts.

    In general, while initial information suggests that China has achieved sixth-generation fighter jet status with the J-36 and J-50, the exact roles and capabilities of these aircraft remain unknown. Sixth-generation fighter jets are distinguished not only by their unique appearances but also by critical internal components and advanced technologies such as engine design, control systems, and artificial intelligence, etc. which collectively define their true capabilities.

    China has indeed made significant strides in military aviation, appearing to lead in the development of sixth-generation fighter jets. Meanwhile, the United States has been working on its own sixth-generation fighter under the Next Generation Air Dominance (NGAD) program, which has faced delays and challenges due to technical complexities and high costs. Western European countries and Japan are collaborating on two projects, Tempest and the Future Combat Air System, to keep pace in the sixth-generation fighter race. Russia is also developing a sixth-generation fighter known as the PAK DP/MiG-41.

    Source:
    Chengdu J-36
    Chengdu J-50
    J-50 Stealth Fighter Revealed
    Delta Wing UAV
    New Chinese Sixth-Gen Fighters